[[testcode]]

[[uploading]]

====== Documentation ======

This area of the wiki will contain full documentation about our system, including dimensional drawings and pictures.



===== Software =====

==== Aerial Imagine System Tutorials ====
  * [[system_build | Description of Streams DLL / filter modules]]
  * [[Streams5]] (walkthroughs)

  * [[histogram_calibration | Camera Histogram Calibration]]
  * [[software:calibration | Camera Target Calibration]] (internal distortion parameters)
  * [[Data Capture]]
  * [[LRF_issue| Laser Range Finder being detected as a mouse]]
  * [[flashprog | Reprogramming DVR flash]] - "Driver failed to start" or "DVR API error"\\


  * **[[software_list | index of miscellaneous software used in the system]] (also, list of files uploaded to the wiki)**

==== Terrest ====

  * [[terrest | Compiling and running Terrest (wxPython GUI)]]
  *  **[[How to compile and run the VS2008 version of Terrest]]**

==== Andrey's Projects ====

  *  **[[How to run Tiepoint code]]**
  *  **[[How to run Tracking code]]**

===== Hardware =====

  * [[Battery Box]]
  * [[Instrument Pod]]
  * [[Mounting Hardware]]
  * [[Door]]
  * [[Data Acquisition Computer]]
  * [[Navigation Computer]]
  * [[Instruments]]

----

  * To get the cameras working with the ViewSonic VX500+ LCD monitor that we have (or to see if another monitor will work with the VGA output)  open DT Connect, then click on Video and for the Video Mode set the output to 1024x768 (for other monitors, try all options to see if any of them work)

  * To take the laser altimeter apart, you only need to unscrew the little screws on the perimeter (8 on the wide sides and 2 on the narrow sides). The large screws on the lens side hold 2 aluminum bars and the 2 little screws hold some circuitry)